精品推荐
CISCO相关技术大集合
日期:2007年7月27日 作者: 查看:[大字体
中字体 小字体 ]
exec-timeout 0 0 password cisco login authentication no_tacacs line 1 16 login authentication tacacs modem InOut modem autoconfigure type usr_courier autocommand ppp transport input all stopbits 1 rxspeed 115200 txspeed 115200 flowcontrol hardware line aux 0 transport input all line vty 0 4 password cisco ! end 2. DDR(dial-on-demand routing)实例 此例通过Cisco 2500系列路由器的aux端口实现异步拨号DDR连接。Router1拨号连接到Router2。其中采用PPP/CHAP做安全认证,在Router1中应建立一个用户,以对端路由器主机名作为用户名,即用户名应为Router2。同时在Router2中应建立一个用户,以对端路由器主机名作为用户名,即用户名应为Router1。所建的这两用户的password必须相同。 相关命令如下: 任务 命令 设置路由器与modem的接口指令 chat-script script-name EXPECT SEND EXPECT SEND (etc.) 设置端口在挂断前的等待时间 dialer idle-timeout seconds 设置协议地址与电话号码的映射 dialer map protocol next-hop-address [name hostname] [broadcast] [modem-script modem-regexp] [system-script system-regexp] [dial-string] 设置电话号码 dialer string dial-string 指定在特定线路下路由器默认 使用的chat-script script {dialerreset} script-name Router1: hostname Router1 ! enable secret 5 $1$QKI7$wXjpFqC74vDAyKBUMallw/ ! username Router2 password cisco chat-script cisco-default ““ “AT“ TIMEOUT 30 OK “ATDT \T“ TIMEOUT 30 CONNECT \c ! interface Ethernet0 ip address 10.0.0.1 255.255.255.0 ! interface Async1 ip address 192.200.10.1 255.255.255.0 encapsulation ppp async default routing async mode dedicated dialer in-band dialer idle-timeout 60 dialer map ip 192.200.10.2 name Router2 modem-script cisco-default 573 dialer-group 1 ppp authentication chap ! ip route 10.0.1.0 255.255.255.0 192.200.10.2 dialer-list 1 protocol ip permit ! line con 0 line aux 0 modem InOut modem autoconfigure discovery flowcontrol hardware Router2: hostname Router2 ! enable secret 5 $1$F6EV$5U8puzNt2/o9g.t56PXHo.
复制本页网址和标题,发送给你QQ/Msn的好友一起分享
上一篇:Cisco常见路由器密码和版本恢复方法
下一篇:65系列机箱种类和区别
CISCO相关技术大集合 相关文章:
CISCO相关技术大集合 相关软件: