Catalyst 2948G-15 配置 2948G-15> (enable) show config This command shows non-default configurations only. Use 'show config all' to show both default and non-default configurations. .......
................ ..
begin ! # ***** NON-DEFAULT CONFIGURATION ***** ! ! #time: Mon Jun 22 2000, 15:41:38 ! #version 5.4(3) ! ! #system web interface version ! set enablepass $2$FNl3$8MSzcpVMg1H2aWfll13aZ. ! #system set system name 2948G-15 set system location Closet10-15 set system contact sysadmin@corp.com ! #frame distribution method set port channel all distribution mac both ! #vtp set vtp domain Closet-10-15 set vtp mode transparent set vlan 1 name default type ethernet mtu 1500 said 100001 state active set vlan 150 name 10.10.150.0/25 type ethernet mtu 1500 said 100010 state active set vlan 155 name 10.10.150.128/25 type ethernet mtu 1500 said 100015 state active set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active stp ieee set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 7 stemaxhop 7 backupcrf off ! #ip set interface sc0 10 10.10.150.4/255.255.255.128 10.10.10.127
set interface sl0 down set interface me1 down set ip route 0.0.0.0/0.0.0.0 10.10.150.1 ! #syslog set logging console disable ! #set boot command set boot config-register 0x2102 set boot system flash bootflash:cat4000.5-4-2.bin set boot system flash bootflash:cat4000.5-2-2.bin set boot system flash bootflash:cat4000.4-5-2.bin ! #port channel set port channel 2/45-46 40 set port channel 2/47-48 41 ! #module 1 : 0-port Switching Supervisor ! #module 2 : 50-port 10/100/1000 Ethernet set vlan 150 2/1-22 set vlan 155 2/23-44 set port name 2/45 2948G-L3-01_Uplink set port name 2/46 2948G-L3-01_Uplink set port name 2/47 2948G-L3-02_Uplink set port name 2/48 2948G-L3-02_Uplink
精品推荐